HD Flat Washers for UHF and N Series Threaded Bulkhead Feed Throughs - 2 Pack
HD Flat Washers for UHF and N Series Threaded Bulkhead Feed Throughs - 2 Pack
- Vendor
- by W5SWL
$1.49
Bulkhead Hardware
A set of two heavy duty flat washers designed for UHF and N Series Bulkhead Feed Throughs. What makes these nice compared to the long searches at a hardware store, is they are just right for purpose and not to big to get the nut trapped down in the washer's hole. Approximately 1-3/6" diameter about 3/32" thick and fits just perfect around the UHF or N series bulkead threaded diameter with just the right amount of sideways wiggle room. Use these for when you are making a feed through in a wall or surface where you need to be able to tighten up a bit without creating a crush in on the wall or surface. Use them for making a too large hole smaller as an overlay for your feed through. Or adding thickness to a car or truck body flat panel from behind. Zinc Plated Steel meeting DIN 125 and ISO 7089 specs. You get a set of two washers.