Simple and easy to use, just attach in the wireless coax line. Comes with the mount bracket shown so you can mount the protector. Remove the mount and place into a bulkhead mount hole. Also has wire connection for easy use should you need to use a ground cable. Applications include Wireless Lan, ISM, MMDS, Cellular and PCS.

Usable range from 0 to 3GHz with gas tube protection. Multi-Strike capability with Bi-Directional Protection. Protector will pass DC and includes the mounting bracket.

The Alteliconﾙ Lightning Protector Model is a very high-performance gas discharge tube suppressor featuring wide-band operation up to 3 GHz. The unit features a bulkhead N-Female connector for mounting through an enclosure wall or using the included stainless steel mounting bracket.

Since this protector will pass DC it is suitable for applications where DC is carried through the coax cable such as remote amplifiers and LNA's.

Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.

The unit's replaceable gas tube element, multi-strike capability and fast response time make it suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing, which provides superior grounding

Here is the Manufacturer's Specs:

Frequency Range: 0 to 3 GHz
VSWR: 1:1.3 Max from 0 to 3 GHz
Insertion Loss: .4 dB Max from 0 to 3 GHz
Impedance: 50 Ohm
Gas Tube Voltage: 90 V +/- 20%
Gas Tube Insulation Resistance: 10,000 MOhm
Gas Tube Impulse Breakdown Voltage: 1000V +/- 20%
Max Withstand Current: 5 KA
RF Power Rating (PEP/CW) : DC-30 MHz 110/55, 30 - 500 MHz 65/32, 500 - 3 GHz 20/10
Connector Body: Nickle Plate Brass
RF Pin: Gold Plate Brass
2.52"x.91"x1.34"

Quantity: One protector